We set a simple goal: to answer most of the questions that you have for free, in a reliable and simple language.
Main page
Warehouse wall, partition, binders and raw materials for them

Warehouse wall, partition, binders and raw materials for them

This reference guide is designed to elaborate upon and work in conjunction with the rating system. Written by expert users of LEED, it serves as a roadmap, describing the steps for meeting and documenting credit requirements and offering advice on best practices. Within each section, information is organized to flow from general guidance to more specific tips and finally to supporting references and other information. Sections have been designed with a parallel structure to support way finding and minimize repetition.

VIDEO ON THE TOPIC: Partition Walls, Types, Advantages, Disadvantages

Dear readers! Our articles talk about typical ways to resolve Warehouse wall, partition, binders and raw materials for them, but each case is unique.

If you want to know, how to solve your particular problem - contact the online consultant form on the right or call the numbers on the website. It is fast and free!


Gypsum building plaster G-5 B II

This reference guide is designed to elaborate upon and work in conjunction with the rating system. Written by expert users of LEED, it serves as a roadmap, describing the steps for meeting and documenting credit requirements and offering advice on best practices.

Within each section, information is organized to flow from general guidance to more specific tips and finally to supporting references and other information. Sections have been designed with a parallel structure to support way finding and minimize repetition.

Each credit category begins with an overview that discusses sustainability and market factors specific to the category. For each prerequisite and credit, readers will then find the following sections:. Further Explanation contains varied subsections depending on the credit; two of the common subsections are elaborated upon here.

Examples include buildings on a corporate or educational campus and structures in a commercial development. Only project teams using the Campus Program need to follow the guidance in the Campus section; the guidance is not applicable to projects that are in a campus setting or are part of a multitenant complex but not pursuing certification using the Campus Program.

For each approach, the reference guide gives any credit-specific information and notes two possible scenarios:. The International Tips section offers advice on determining equivalency to U. It is meant to complement, not replace, the other sections of the credit. Helpful advice for projects outside the U. When no tips are needed or available, the International Tips heading does not appear. IP refers to the system of measurements based on the inch, pound, and gallon, historically derived from the English system and commonly used in the U.

SI is the modern metric system used in most other parts of the world and defined by the General Conference on Weights and Measures. Green Building Council through its process for establishing non-U. The realization of benefits associated with LEED starts with a transformation of the design process itself. Success in LEED and green building design is best accomplished through an integrative design process that prioritizes cost-effectiveness over both the short and long terms and engages all project team members in discovering beneficial interrelationships and synergies between systems and components.

By integrating technical and living systems, the team can achieve high levels of building performance, human performance, and environmental benefits. Conventionally, the design and construction disciplines work separately, and their solutions to design and construction challenges are fragmented. The corollary is that when areas of practice are integrated, it becomes possible to significantly improve building performance and achieve synergies that yield economic, environmental, and human health benefits.

In an integrative process, an entire team—client, designers, builders, and operators—identifies overlapping relationships, services, and redundancies among systems so that interdependencies and benefits which otherwise would have gone unnoticed can be exploited, thereby increasing performance and reducing costs.

To work this way requires that project teams, whose members represent various disciplines, come together so that the knowledge, analyses, and ideas from each discipline can inform and link with the systems and components of all other disciplines. In this way, LEED credits become aspects of a whole rather than separate components, and the entire design and construction team can identify the interrelationships and linked benefits across multiple LEED credits. The coordination of building and site systems should be addressed early, preferably before schematic design.

The strategies in the Integrative Process credit are recommended for all LEED projects because they encourage integration during early design stages, when it will be the most effective.

The credit introduces an integrative process by focusing on engaging energy- and water-related research and analysis to inform early design decisions through high levels of collaboration among all project team members.

Approaching certification using an integrative process gives the project team the greatest chance of success. The process includes three phases:. Achieving economic and environmental performance requires that every issue and all team members clients, designers, engineers, constructors, operators be brought into the project at the earliest point, before anything is yet designed.

The structure to manage this flow of people, information, and analysis is as follows:. This process of research, analysis, and workshops is done in an iterative cycle that refines the design solutions. In the best scenario, the research and workshops continue until the project systems are optimized, all reasonable synergies are identified, and the related strategies associated with all LEED credits are documented and implemented.

Begin initial research and analysis see Integrative Process Credit. When sufficient information has been gathered, hold a goal-setting workshop to discuss findings.

For many credits, Further Explanation highlights rating system and project type variations to help teams develop a successful approach. All projects seeking certification are required to comply with the minimum program requirements MPRs for the applicable rating system, found in this reference guide and on the USGBC website.

Once these values are articulated, project teams will be able to select appropriate strategies and associated LEED credits to meet the goals. The recommended method for establishing project goals is to convene a goal-setting workshop see Integrative Process Credit for the project team members and the owner.

To capture the most opportunities, the workshop should occur before any design work and include wide representation from the design and construction disciplines. Special considerations include off-site or campus amenities or shared facilities that may be used by project occupants.

Next, map the LEED project boundary along property lines. If the project boundary is not obvious because of ownership by multiple entities, partial renovations, or other issues, see the minimum program requirements.

Share the final project boundary decision with the entire team, since this site definition affects numerous prerequisites and credits. If the project owner is planning multiple similar buildings in different locations, Volume may be a useful program to streamline certification.

If the project includes multiple buildings in a single location, Campus may be appropriate. Use the project goals to identify the credits and options that should be attempted by the team. The Behind the Intent sections offer insight into what each credit is intended to achieve and may help teams align goals with credits that bring value to the owner, environment, and community of the project.

This process should focus the team on those credits with the highest value for the project over the long term. Once the high-priority credits have been selected, identify related credits that reinforce the priority strategies and provide synergistic benefits. Make sure that all prerequisites can be met and include a buffer of several points above the minimum in case of changes during design and construction.

Project team members should perform additional research and analysis as the project progresses, refining the analysis, testing alternatives, comparing notes, generating ideas in small meetings, and evaluating costs. Examples of research and analysis for energy- and water-related systems are outlined in the Integrative Process credit. The project team should reassemble occasionally to discuss overlapping benefits and opportunities e.

This approach encourages the discovery of new opportunities, raises new questions, and facilitates testing across disciplines. The above pattern of research and analysis followed by team workshops should continue until the solutions satisfy the project team and owner.

Select one team member to take primary responsibility for leading the group through the LEED application and documentation process.

This leadership role may change from the design to the construction phase, but both the design and the construction leaders should be involved throughout the process to ensure consistency, clarity, and an integrative approach. Cross-disciplinary team ownership of LEED credit compliance can help foster integrative design while ensuring consistent documentation across credits.

On a credit-by-credit basis, assign primary and supporting roles to appropriate team members for credit achievement and documentation. Clarify responsibilities for ensuring that design decisions are accurately represented in drawings and specifications and that construction details match design documentation.

Establish regular meeting dates and develop clear communication channels to streamline the process and resolve issues quickly. Data accumulated throughout the construction process, such as construction materials quantities, should be gathered and assessed at regular intervals to allow the team to track ongoing progress toward credit achievement and ensure that information is not misplaced or omitted. Maintaining Consistency in the Application, below, and the credit category overviews discuss the numeric values and meaning of terms that affect achievement of multiple credits within a credit category.

A quality assurance review is an essential part of the work program. The submission should be thoroughly proofread and checked for completeness. In particular, numeric values that appear throughout the submission e. Certain issues recur across multiple credits and credit categories and must be treated consistently throughout the submission. Projects with a combination of space types or unusual space types should pay particular attention to how these characteristics influence credit achievement.

Common project programs that require additional consideration include the following:. Projects with a mix of uses may find it helpful to consult the Project Type Variations and Rating System Variations sections in the reference guide for advice. Some projects may be part of a large complex of buildings or a master planned development. Any project can follow the multitenant complex approach if it is part of a master plan development, regardless of whether the project is using the LEED Campus approach.

Additionally, projects that include incomplete spaces must use Appendix 2 Default Occupancy Counts to establish occupant counts for incomplete spaces. For prerequisites with established baselines e. Project teams that wish to claim environmental performance or benefit beyond the baseline for incomplete spaces should refer to the Tenant Lease and Sales Agreement section. Primary and secondary school projects, hospitals general medical and surgical , hotels, resorts, and resort properties, as defined for ENERGY STAR building rating purposes, are eligible to include more than one physically distinct structure in a single LEED project certification application without having to use the Campus Program, subject to the following conditions.

Any single structure that is larger than 25, square feet 2 square meters must be registered as a separate project or treated as a separate building in a group certification approach.

Refer to the minimum program requirements for information on how boundaries should be drawn for renovation and addition projects. Additionally, use the following guidance for treating energy systems in any project with mechanical systems.

At a minimum, the scope includes the core and the shell of the base building but can vary significantly from project to project. Given that Core and Shell is limited in its ability to control the design and construction of tenant interior fit-outs, project teams should pursue credits that address parts of the building within the LEED project scope.

Only portions of the building within the LEED project scope should be used in credit calculations. If a project team wishes to pursue additional credits or thresholds beyond the construction scope of the LEED project, a binding tenant sales and lease agreement must be provided as documentation. This must be signed by the future tenant and include terms related to how the technical credit requirements will be carried out by the tenant.

An unsigned or sample lease agreement is not acceptable. Please note that lease agreements are not required in order to pursue Core and Shell. They are only used if a project is aiming to earn additional points considered outside of the project design and construction scope that will be fit-out by a future tenant.

Several credits require the assessment of a piece of land to determine whether it has been previously developed, defined as follows:.

Land that is not previously developed and landscapes altered by current or historical clearing or filling, agricultural or forestry use, or preserved natural area use are considered undeveloped land. The date of previous development permit issuance constitutes the date of previous development, but permit issuance in itself does not constitute previous development.

Tricky lands to assess include those with few buildings present. If the land previously had buildings, then it is considered previously developed even if those buildings have since been torn down. Another frequently confusing situation is parkland. Pay careful attention to the type of parkland. Improved parks with manicured landscaping and constructed features like playgrounds e. Land that has only been cleared or graded, with no additional improvements, is not considered previously developed.

Land maintained in a natural state e.

Modelling Clay

The ISOBIO project has successfully developed a composite bio-based wall system that has shown exceptional hygrothermal performance and reliability, providing a new-build wall panel that can be industrialised and manufactured at scale, ready for integration into a complete pre-fabricated construction system for nearly-zero energy buildings. Information relating to water-proofing, airtightness and vapour control is included. All details have been modelled with 2-dimensional thermal bridge software, and designed to minimise heat loss and ensure minimum internal surface temperatures to avoid surface mould growth and condensation.

Your browser's Javascript functionality is turned off. Please turn it on so that you can experience the full capabilities of this site.

You have no items in your shopping basket. Take a benefit from punctual delivery and many other great services. We're here to help you. Our technical specialist sales team members can advise on all applications and sort out any problems for you. The aim of this webshop is to help you find what you are looking for as fast as possible, to show you alternatives and accessories at different price levels from the 50, article product range, and in-use videos or close-ups so that you can really see what you get.


A standing single or two story structure or enclosure composed of multiple prefabricated wall sections, or modules, which are combined together in a systematical format allowing relative ease of assembly, quick installation and the ability to disassemble and move the structure in units or in its original unassembled sections for later reassembly and reuse. Modular wall systems offer a quick, affordable, flexible solution that grows with your business. Modular systems are prefabricated in a factory, using fewer raw materials and making more efficient use of materials and labor. Modular parts are then transported to and installed on the building site. Your business will experience virtually no downtime. You bet they are! All modular buildings are built to comply with all local building codes and seismic codes. Once a modular building goes up, it stays up until you decide to take it down. Not very long.

Binderholz Product Catalog

Chase Doors 48" 14 ga. Narrow Your Results. Search Within Results. Pedestrian Walkway Strip Curtain Doors.

Even today the Binder family still support the brand name of binderholz.

Incorrect login or password. Number of companies: 2 Number of countries: Payment and delivery. Global Rus Trade.

Surface coatings

In stock How to buy About delivery. The recommended retail price including VAT excluding delivery is provided for reference and is not a public offer. When ordering directly from us, the products will be shipped from the central warehouse in Samara. New review.

The Hempcrete Book Green Books, by William Stanwix and Alex Sparrow provides a full explanation of construction techniques, highlighting potential pitfalls and how to avoid them, and includes a comprehensive resources section and examples of completed builds, with design notes. Hemp for use in construction forms a relatively small, but growing, proportion of the output from hemp farming in the UK. The main ways in which hemp is used in construction are to make hempcrete and to provide fibres for quilt insulation. It is created by wet-mixing the chopped woody stem of the hemp plant hemp shiv with a lime-based binder to create a material that can be cast into moulds. Hempcrete was developed in France in the mids, when people were experimenting to find an appropriate replacement for deteriorated wattle and daub in medieval timber-frame buildings.

Tag: bio-based materials

Directory of Microbicides for the Protection of Materials pp Cite as. Already in the year 15 b. The cave contains an impressive display of prehistoric wall paintings done with mineral pigments mixed with animal fat as a binder. After only 15 years opened to be visited by the public the cave had to be closed again because of microbial growth on the paintings. Algae of the genus Chlorococcales were favored to grow after visitors brought into the cave considerable amounts of soil and air pollution. Today, the design i. Material and products are completely altered in all aspects by applying coatings. Surface coatings protect objects, provide functionality, prolong the life-span and maintain the value of assets.

Hempcrete is a natural building material with excellent qualities. It is created by wet-mixing the chopped woody stem of the hemp plant (hemp shiv) with a inside the wall, together with the properties of the lime binder itself, a hempcrete wall Until recently, the majority of UK hemp farmers supplied their raw hemp under.

High parametric clocks for decoration and interior design. Various types: analog and digital, modern and antique style, wall hung and alarm. Whether used for vertical applications or as an accent to countertops, the Decorative Metals line is surprisingly adaptable and a virtually unbreakable addition to any commercial project. Choose from two unique, architectural options to add the perfect finishing touch to countertops, vanities, tables, and desks.

Using Hemp in Construction

Sign In. Join Free. Inquiry Basket.


All rights reserved. Designing your products with detachable connectors allows for interchanging the cords with minimal design changes. Locking versions mate to any inlet regardless of manufacturer. All parts, such as gears, shafts and gearboxes are produced and assembled in our production facility in Haarlem.

Она понимала, что коммандер заплатил огромную цену за ее избавление. - Простите меня, - сказала .

Черт с ней, с Цифровой крепостью. Пришла пора действовать. Нужно выключить ТРАНСТЕКСТ и бежать. Она посмотрела на светящиеся мониторы Стратмора, бросилась к его письменному столу и начала нажимать на клавиши.

Любое подозрение об изменении Цифровой крепости могло разрушить весь замысел коммандера. Только сейчас она поняла, почему он настаивал на том, чтобы ТРАНСТЕКСТ продолжал работать. Если Цифровой крепости суждено стать любимой игрушкой АНБ, Стратмор хотел убедиться, что взломать ее невозможно. - Ты по-прежнему хочешь уйти. Сьюзан посмотрела на. Сидя рядом с великим Тревором Стратмором, она невольно почувствовала, что страхи ее покинули.

Беккер хотел подняться на ноги, но у него не было на это сил. Ослепленные глаза горели огнем. Он хотел крикнуть, но в легких не было воздуха, с губ срывалось лишь невнятное мычание. - Нет! - закашлявшись, исторгнул он из груди.

Comments 1
Thanks! Your comment will appear after verification.
Add a comment

  1. Dorg

    I think, that you are not right. Let's discuss.